liquid filter bag

PPliquid filter bag
filter bag material Polypropylene,Polyester,Teflon

liquid filter bag

 

Description:

 

size:7*16,7*32,4*8.25,4*14 inch 

material:polypropylene,polyester,teflon

filter bag collar material:stainless steel ring,galvanized ring and polypropylene plastic ring.

filteration precision:1~200µm

 

liquid filter core instructions:

 

1. Thoroughly clean the strainer

2. Open outfit filter paper carton, remove inside filter, note top labels and plastic bags are intact

3. Open the plastic bags, check the sealing ring is installed properly

4. By process liquid (such as water) wet "0" type circle

5. To plastic packaging as protection, holding the filter at the end of nearly socket, will filter vertical pressure into the filter positioning hole in the type filter, card must be rotating card tight

6. Will take cover plastic shopping bags, with nut embossed spanner

7. Open filter top exhaust valce

8. Slightly open the inlet valve, causes the liquid into the filter from vent inside when liquid spill, then close in vent

9. Slowly open the downstream export valve, until completely open

10. Slowly adjusting the inlet valve, until completely open

11. With every 10 inch filter to 250L/h flow flush for 10 minutes

12. Unfavorable impact filter, avoid big flow pressure in the opposite direction

13. If filter to pressure differential P than 0.15 Mpa or flow decreased obviously, indicates that filter already jams with holes most

14. Such as temporary not use, foldable filter should not be will filter dry, and should be preserved in the strainer filtering, filter into a antibacterial agent of water (such as 10ppm sodium chlorate solution or 2% of hydrogen peroxide solution, resetting prior to use, should antibacterial agent is rinsed clean)

 

 

liquid filter material (material:polypropylene,polyester)(for both cloth and bag)

 

liquid filter material (material:polypropylene,polyester)(for both cloth and bag)

 

If you have any questions, feel free to contact us.